High-Speed Resin 3D Printer | Print Up to 3X Faster
Experience the cutting-edge evolution of 3D Printing with the Anycubic Photon Mono M5s 3D Printer. Featuring a groundbreaking 10.1-inch monochrome LCD screen with an astonishing resolution of up to 11520*5120, this printer sets a new standard for precision and detail. Its innovative auto-leveling solution revolutionizes LCD 3D Printing, ensuring unparalleled accuracy and convenience, making it a game-changer in the world of consumer-grade resin printing.
The Photon Mono M5s's 10.1-inch screen has a 12K resolution and a 19-micron X accuracy, with printing details as precise as a hair thickness.
The fit between the printing platform and the floating levelling module is detected by a mechanical sensor on the cantilever arm, and it is automatically adjusted as a result of the detection results. The likelihood of levelling failure is eliminated, and printing success rate is increased.
The Photon Mono M5s can print at an average speed of 105mm/h*. It employs a high-speed release film that can reduce the release force and increase lifting speed while lowering the release height, resulting in a high printing success rate.
It quickly identifies and resolves hardware issues by performing numerous tests on the connectivity of the exposure screen, mechanical detection module, and motor operation status. This helps to achieve printing success by ensuring smooth and non-destructive connections.
The resin detection mode is set to intelligently determine whether the amount of resin in the vat satisfies the printing requirements before printing in order to decrease printing failures brought on by insufficient resin. Reduces print errors caused by resin shortages.
Reminders for common failures like bottoming-out printing will be provided by the prints status detection function, significantly reducing resin and time waste. It can also deftly identify the root causes of errors and make useful recommendations to guarantee effective printing.
You can instantly experience 3D Printing with one touch using well-known sliced models/STL's. The control of your printing process is ensured by task viewing.
The "Intelligent Mode" option in the brand-new Anycubic Photon Workshop 3.1 slicing programme can intelligently match exposure parameters to model details and size, lowering the risk of printing failure brought on by incorrect parameter settings.
The stability and success rate of printing are further enhanced by the new support algorithm, which also lessens model surface damage and facilitates the removal of supports and bottom valves. Completely increase the punching and slicing speeds, making slicing simpler to use.
Average Printing Speed
With high speed resin - 105mm/hr. or 4.13 in./hr.
With general resin - 70mm/hr. or 2.76 in./hr.
LED matrix UV light source
Double liners with 10 μm
Unibody design with scale lines
12K(11,520 x 5,120px) resolution
480:1 contrast ratio
4.7 % light transmittance
2,000 hours typical lifespan
Laser engraving aluminum alloy
4.3" TFT touch-control
Effectively blocks UV radiation
Oversized Protection Film
Replaceable anti-scratch film
100W rated power
USB Type-A 2.0 WIFI