On your desktop and on your schedule, the Voltera V1 gets you from prototype to production faster than ever before. Create two layer circuit boards on your desk. Load your Gerber files and watch the dispenser lay down a silver-based conductive ink to print your circuit right before your eyes.
Focus on designing, not soldering. Regardless if your boards come from a factory, or from your desk - just mount them on the V1 and off you go. Say goodbye to stencils and cut your assembly time in half. Assembling boards is easy - it is quick turn PCBA at your desk!
Voltera’s software is designed to be understood. From importing your Gerber files to the moment you press print, the software walks you though each step with built in videos and tutorials. Compatible with EAGLE, Altium, KiCad, Mentor Graphics, Cadence, DipTrace and Upverter. Is your CAD tool not on this list? Contact us to find out if we're compatible!
The ink cartridge is installed in the dispenser, and the dispenser is mounted on the V1. All of our attachments are magnetically mounted, so you do not need any special tools to swap them. During a print, the dispenser gear will rotate to apply and relieve pressure to accurately control the ink flow. With the click of a few buttons you can be printing 8 mil (200 micron) traces, but don't worry the software will guide you every step of the way.
This high precision probe was developed from the ground up and creates a height map of your substrate. The V1 takes the map into account and makes micro adjustments to ensure a constant printing height of 100 microns. Since we do not need the substrate to be conductive, we can dispense on rigid materials like FR4, glass and ceramics, along with flexible substrates like Kapton (Polyimide).
Minimum Trace Width
0.2mm
Minimum Passive Size
1005
Minimum Pin-To-Pin Pitch
0.65mm
Resistivity
12mΩ/Sq @ 70um Height
Supplied Substrate Material
FR4
Maximum Board Thickness
3mm
Print Area
128mm X 105mm
Max. Heated Bed Temperature
240°C
Minimum Pin-To-Pin Pitch
0.5mm
Solder Paste Alloy
Sn42/Bi57.6/Ag0.4
Solder Wire Alloy
SnBiAg1
Soldering Iron Temperature
180-210°C
Operating Systems
Windows 7, 8, 10 (64bit), OSX 10.11+
Compatible File Format
Gerber
Connection Type
Wired USB
"INTERNATIONAL WINNER"
"INVENTION OF THE YEAR"
"INTERNATIONAL WINNER"
"EDITOR'S CHOICE"