Features Of Photon M3 Premium

8K High Resolution

28.5μm XY Resolution.

Anycubic LighTurbo 2.0

Brand New Released Light Source Technology.

10-inch Monochrome LCD Screen

380:1 High Contrast Ratio.

Ball Screw Double Threaded Rods

95mm/hour Max Printing Speed.

8K High Precision Resolution

The Anycubic Photon Mono 4K has a 10-inch monochrome LCD panel with a 7680x4320 resolution and an XY-resolution of 28.5m, which is 216% and 40% greater than the Anycubic Photon Mono 4K. The sharp corners and delicate edges of the models are flawlessly printed, showing the beauty of finer details.

Details Exceeding 8K

The unique self-invented LightTurbo 2.0 light source solution provides the COB light source system's high light uniformity while avoiding stray light, resulting in a delicate and smooth model surface.

Upgraded Cooling System

The temperature is automatically detected by a mix of software and hardware. It regulates the speed of the cooling fan to keep the printing environment below 65°C, thereby extending the life of the light source.

Huge Volume Brings Limitless Creativity

Anycubic Photon M3 Premium has a printing size of 250 x 220 x 120 mm (HWD) and a maximum printing capacity of 6.7L, giving designers greater creative room while assuring printing accuracy.

Double Threaded Rods with Stability

When compared to the T-shaped threaded rod, the ball screw double-threaded rods provide 0.005mm of better structural precision, which is only half of the regular T-shaped rod printer, considerably reducing layer line impacts. By using the rolling friction concept, the double-threaded rods reduce platform lifting resistance while printing, increasing printing speed.

Anycubic App - 3D Printing with a Single Tap

Users may use their cellphones to select models, slice online, print in one touch, and monitor printing progress using the Anycubic APP. The Anycubic APP, which allows you to print anywhere, at any time, and enjoy the thrill of fulfilling your ideas with a single touch, also includes a helpful assistance centre. The Anycubic APP is accessible on Google Play, the App Store, and the Anycubic official website.

Photon M3 Premium 3D Printer has Anycubic App using this 3D Printing is possible with a Single Tap

Effective Air Purification

The double air-purifier system has high-density activated carbon within the air purifiers. The symmetrical twin air intake design increases the area of the air inlet and output by 1.5 times, resulting in 80% odor elimination in 10 minutes.

Greater Vat, Lower Refill

For printing huge 3D objects, a 60% larger resin tank removes the need to constantly refill resin. When compared to regular FEP film, the use of NFEP film makes the prints easier to detach, boosting the printing success rate by 10%.

Countless Possibilities

Anycubic Photon M3 Premium 3D Printer can easily handle a wide range of printing requirements, allowing for cheaper cost, higher volume, and higher precision model printing.