Elegoo Mercury Plus 2 in 1 Washing and Curing Station V1.O | 3Ding India | 3D Printers & 3D Printing Services in India
Elegoo Mercury Plus 2 in 1 Washing and Curing Station V1.O
anycubic logo

Mercury Plus 2 in 1 Washing and Curing Station V1.O

The Wash and Cure 2 in 1 design combines washing and curing for 3D Printed items in a single machine. The operational procedure is now more efficient and requires less work to suit your various needs. The models can be cleared separately in the cleaning basket, or they can be mounted on the build plate and washed simultaneously, avoiding direct contact with uncured resin. The platform bracket's height can be modified to accommodate the liquid level in the bucket.

Elegoo Mercury Plus 2 in 1 Washing and Curing Station V1.O details

Features Of Elegoo Mercury Plus 2 in 1 Washing and Curing Station V1.O


Washing with Printing Platfrom

If the printed model is not removed from the build platform, please attach the build platform to the adjustable platform bracket (the platform bracket's height can be adjusted to fit the liquid level in the bucket, up to a maximum model height of 120 mm), then hang the adjustable platform bracket on top of the pillar to begin cleaning.

Elegoo Mercury Plus 2 in 1 Washing and Curing Station V1.O features

Washing with Bucket

If the printed model has already been removed from the build platform, place it in the cleaning basket (maximum model height is 160 mm) and hang the cleaning basket on top of the pillar to begin cleaning it. This cleaning option is available for models greater than 15 mm in size. Some tiny models can be cleaned in the bucket together.

Elegoo Mercury Plus 2 in 1 Washing and Curing Station V1.O features
Elegoo Mercury Plus 2 in 1 Washing and Curing Station V1.O features

Intelligent Curing Control

Place the curing turntable firmly against the turntable positioning hole and Centre the model on it. To safeguard your vision, cover the anti-UV lid, which can filter 99.95% of ultraviolet rays. You can quickly set and monitor the time by using the sensitive touch button and 0.96 inch TFT LCD screen. When the curing is complete, the machine will beep.

360 Degree All-Around Curing

The 360-degree spinning turntable with UV light can cure the models perfectly.

Elegoo Mercury Plus 2 in 1 Washing and Curing Station V1.O features
Elegoo Mercury Plus 2 in 1 Washing and Curing Station V1.O features

Powerful UV Light

Place the curing turntable firmly against the turntable positioning hole and Centre the model on it. To safeguard your vision, cover the anti-UV lid, which can filter 99.95% of ultraviolet rays. You can quickly set and monitor the time by using the sensitive touch button and 0.96 inch TFT LCD screen. When the curing is complete, the machine will beep.

Platform Bracket

The platform bracket's height can be changed to meet the liquid level in the bucket, allowing the models to be completely cleaned.

Elegoo Mercury Plus 2 in 1 Washing and Curing Station V1.O features

Sample


ELEGOO Mercury Plus 2 in 1 Washing and Curing Station V1.O review

Technical Specifications


Elegoo Mercury Plus 2 in 1 Washing and Curing Station V2.O technical specifications

Control Method

Touch button

Rated Power

48W

Input Voltage

110V/220V 50/60Hz

UV Light

385nm+405nm (8+8)

Time Setting

0-30mins

Machine Size

200mm*200mm*352mm

Maximum Curing Size

φ140*165mm

Maximum Wash Volume

125mm*85mm*160mm

Maximum Curing Size

φ140*165mm

Machine Net Weight

4.8kg

Operation Instructions


  • Please clean and blow-dry the model once it has been printed before inserting it into the machine.
  • Reduce the curing time if the model turns yellow after curing. A yellowish model will result from overcuring.
  • The recommended ambient temperature is 0-40 degrees, and the recommended humidity level is 20%-50%.
  • To avoid overheating, please do not use it for longer than 40 minutes at a time.
  • Cure Time: If the model diameter is smaller than 30 mm, the curing time should be 2 minutes. If the model's surface structure is complex, it is recommended that the curing time be increased appropriately.
  • Special Notes: The cleaning capability is insufficient for 3D models printed with water washable resin, which should be washed instead.

© 2013 - 2022 Copyright: 3Ding | Reddx Technologies Pvt Ltd

Request Quote