Resin/DLP 3D Printer
Anycubic x Texas Instruments
Consumer DLP® 3D Printer.
Double Algorithms
produces higher resolution prints.
Laser Engraving Platform
Experience a high success rate.
Larger Printing Dimension
130.56x73.44x165mm.
Thousands of mirrors (DMD) are used in the DLP (Digital Light Processing) 3D Printing technology to focus the light with little diffusion directly onto the bottom of the resin vat, enhancing the light's homogeneity and producing printing results with an extremely high degree of precision.
The most recent light uniformity algorithm is used, increasing light uniformity to above 92%. The anti-aliasing effect is substantially improved when combined with the anti-aliasing method, adding more details to the miniatures.
Due to the DLP projector's 20,000-hour lifespan, screens do not need to be replaced as frequently as LCD printer screens, which have a lifespan of 2,000 hours each. This results in significant maintenance cost savings.
When compared to Anycubic Photon Ultra, Anycubic Photon D2's printing volume rises by 62% to 130.56mm*73.44mm*165mm and its printing area by 55% to 95.42cm².
Due to the fact that DLP technology's light source modules produce relatively little heat when operating, it is now possible to construct printers without a fan for heat dissipation. delivering a calm and relaxing printing experience.
Since the light source can be used effectively by the Digital Light Processing (DLP) technology, the power consumption of the printer can be as low as 15W, or only one-fourth that of LCD printers.
A superior printing success rate is brought about by the specifically created laser engraving pattern, which greatly improves the adhesion of the printing platform.
The Anycubic Photon D2 DLP resin 3D Printer uses DLP technology to handle more precise and accurate 3D Printing, capturing more vivid details.
Whether it be the need for fine craftsmanship and customised fit in the jewellery design industry, the requirement for extreme precision in dentistry applications, or even the requirements of professionals and amateurs for a wide variety of models and artwork.
Resin vat
One-piece design with scale line
Build platform
Laser Carved Metal
Exposure size
95.42cm²
Uniformity
92%
light transmittance
92%
Projector resolution
2560*1440
Control panel
2.8" TFT touch-control
Machine leveling
Manual(4-point)
Exposure time
≥2.5s/layer
Data input
USB-A 2.0
Rated power
15W
Printing size
165 x 130.56 x 73.44 mm (HWD)
Machine size
438 x 236 x 226 mm (HWD)
Machine weight
8.8 lb./4 kg