The Creator 3 Pro is an extremely smart and expert 3D Printer. Independent dual extruders enable simultaneous Printing of two different materials and colours. This 3D Printer further optimizes the extruder structure and Print motion control when compared to the Creator 3.
These extruders arrange the improved levelling sensors, optimize the blowing structure of the extruder and heater, and significantly speed up platen heating, all of which contribute to better Printing quality and more effective printing services. The Flashforge Creator 3 Pro has cutting-edge technologies like autocalibration, filament sensors, an integrated HD camera, several networking choices, etc. that enhance Printing and the user experience.
With Flashforge Creator 3 Pro, levelling is more likely to be successful and Printing positioning is more precise.
A plate with excellent thermal conductivity will heat up quickly. Printouts can be removed by gently bending a flexible plate. It is quickly absorbed onto the base platform thanks to an internal magnet.
Controllable wind speed for better engineering filament Printing quality.
This setup is simple to detach and maintain because the nozzle and heater block are combined.
Newly updated second-generation logic control chip is included with the Creator 3 Pro. Improved human-computer interaction and 3-axis operation.
The heating speed of the platform is increased by 5 times.
It takes only 3 minutes to heat up the build plate to 110℃.
Multi-mode printing is supported by the IDEX structure, and efficiency has increased.
Technology
FDM (Fused deposition modeling)
Extruder
2, Independent
Printing volume
300 x 250 x 200 mm
Layer resolution
50 - 400 microns
Print speed
10-150 mm/s
Filament diameter
1.75 mm
Nozzle diameter
0.4mm / 0.6 mm / 0.8 mm
Screen
4.5-inch Touch Screen
Integrated camera
Yes
Noise
50 dB
Version
FlashPrint
AC Input
100-240 VAC, 48-63Hz
Consumption
500 W
Temp. max. of the extruder
320 °C
Temp. max. of heatbed
120 °C
Ambient temperature
18 - 30 °C
Storage temperature
0 - 35 °C
Connectivity
WI-FI, ethernet, USB, Flashcloud
Compatible materials
PLA / ABS / PVA / PETG / HIPS / PA PC / WOOD / ASA / PA-CF / PA-GF
Supported files
33mf / stl / obj / fpp / bmp / png jpg / jpeg files
Compatibility
Mac OS, Windows 7 or higher, Linux
